Pressure transmitters

The wireless WGP10 relative pressure sensors measure the pressure of various industrial processes and transmit them wirelessly to a central collector (WCC10). This sends the values from multiple sensors via WirelessHART to any central system. There are versions with pressure ranges up to 2.1, 21 or 70 bar. The field sensors are explosion-proof according to ATEX and Canadian and American guideline…

The wireless WAP10 absolute pressure sensors measure the pressure of various industrial processes and transmit them wirelessly to a central collector (WCC10). This sends the values from multiple sensors via WirelessHART to any central system. There are versions with pressure ranges up to 2.1 bar absolute. The field sensors are explosion-proof according to ATEX and Canadian and American guidelines.

The VPL series pressure transmitters are developed for measuring water pressure in cooling systems and central heating installations. The VPL series is optionally available with a display.

The Foxboro Model 11GM Transmitters accurately measure gauge pressure and transmit a proportional pneumatic output signal to receivers which may be several hundred meters or yards away.

Klay-Instruments' series 8000 is a complete line of pressure transmitters that can also be used for level measurement. The transmitters are made entirely of stainless steel and have a very strong front membrane. These diaphragms offer high protection against overpressure and prevent coagulation and accumulation of the medium in the pressure transmitter. The transmitters are ideally suited for ind…

The 4000 series from Klay-Instruments is a complete line of intelligent pressure transmitters that can also be used as level transmitters and are microprocessor-controlled. These transmitters are easily configurable using a single programming button and have a stainless steel housing. Thanks to the unique ‘One Touch Programming Button’, zero and span can be set without applying pressure, and a…

The 2000 series from Klay-Instruments is a complete line of ‘intelligent’ pressure transmitters that can also be used as level transmitters. These transmitters are microprocessor-controlled and easily adjustable via three push buttons, all housed in a full stainless steel casing. The display and buttons make the transmitter easy to configure. The pressure transmitters are equipped with a flush…

The Kimo CP116 series is a barometric pressure transmitter with or without display. The CP116 measures the athmospheric air pressure. The installation is very easy and the housing can be mounted in two parts making it ideal for installers.

The IGP05S series is a budget-friendly pressure transmitter within the Schneider Electric range and is standard SIL2 certified. The IGP05S measures a relative pressure with an accuracy of 0.075% of the selected measuring range, ranging from 50 kPa to 345 bar. This makes the IGP05S pressure transmitter less accurate than its bigger brothers, but also a lot cheaper. For less demanding applications,…

The IGP50S series is a very robust and extremely accurate gauge pressure transmitter within the Schneider Electric range and is SIL2 certified as standard. The IGP50S measures a relative pressure with an accuracy of 0.025% of the reading. Thanks to the special FoxCal technology, one transmitter has no less than 11 calibration curves in a pressure range of 0-414 bar. This allows the same model IG…

The IGP10S series is a very robust and advanced pressure transmitter within the Schneider Electric range and is SIL2 certified as standard. The IGP10S measures a relative pressure with an accuracy of 0.05% of the reading. Thanks to the special FoxCal technology, one transmitter has no less than 11 calibration curves in a pressure range of 0-414 bar. This allows the same model of pressure transmit…

The Foxboro IGP10 series is a compact and robust gauge pressure transmitter for direct process mounting. The IGP10 series is available in different measuring ranges of 500 mbar, 2.1 bar, 21 bar and 210 bar relative pressure. As signal output you can choose 1-5V, 4-20 mA, Hart, Foudation Fielbus and FoxCom. The IGP10 series is available as a safe area version, but also as an explosion-proof versio…

The IAP50S series is a very robust and extremely accurate pressure transmitter within the Schneider Electric range and is SIL2 certified as standard. The IAP50S measures an absolute pressure with an accuracy of 0.025% of the reading. Thanks to the special FoxCal technology, one transmitter has no less than 11 calibration curves in a pressure range of 0-414 bar. This allows the same model IAP50S p…

The IAP10S series is a very robust and advanced pressure transmitter within the Schneider Electric range and is SIL2 certified as standard. The IAP10S measures an absolute pressure with an accuracy of 0.05% of the reading. Thanks to the special FoxCal technology, one transmitter has no less than 11 calibration curves in a pressure range of 0-414 bar. This allows the same model of pressure transmi…

The Foxboro IAP10 series is a compact and robust absolute pressure transmitter for direct process mounting. The IAP10 series is available in different measuring ranges of 2.1 bar, 21 bar and 210 bar absolute pressure. As signal output you can choose 1-5V, 4-20 mA, Hart, Foudation Fielbus and FoxCom. The IAP10 series is available in a safe area version or explosion-proof version according to ATEX,…

The IAP05S series is a budget-friendly pressure transmitter within the Schneider Electric range and is standard SIL2 certified. The IAP05S measures an absolute pressure with an accuracy of 0.075% of the chosen measuring range, varying from 50 kPa to 345 bar. This makes the IAP05S pressure transmitter somewhat less accurate than its bigger brothers, but also a lot cheaper. For less demanding appli…

The Foboro Accutech series consists of these pressure transmitters. The GP10 is a wireless relative (guage) pressure transmitter for static pressure measurement with a range of 250 to 10,000 psig (17 - 690 Barg). The AP10 series is a wireless absolute pressure transmitter with a range of 30 to 250 psig (2 - 17 BarA). The Accutech transmitters communicate with the Accutech base station over distan…

The Series DPG-200 digital pressure gage has a precise ±0.25% full scale accuracy. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gages. The DPG-200 is packaged in a durable extruded aluminum case (IP66). The unit is powered by 12-24 VDC/VAC and contains two alarm set points along with a 4-20 mA process outp…

The Barksdale UPA2 series consists of very robust pressure transmitters with high accuracy. The UPA2 series is available in a pressure range of 1 bar up to 800 bar. These industrial pressure transmitters can also be used in shipping by the GL ship's approval.

The Barksdale 450X series is an explosion-proof, compact and intelligent pressure transmitter with Hart communication. The compact shape makes the pressure sensor easy to build in a machine without taking up too much space. The 450X series is suitable for various applications including; hydraulics (power packs), water treatment and various other industrial processes. The 450X series pressure tran…

Electronic pressure switch for pressure control with internal stainless steel diaphragm, digital display, 4 switching outputs and 1 analog output. OEM applications, hydraulic and pneumatic systems, heavy industry and plant engineering, automobile industry

The Barksdale BPS3000 series is an electronic pressure switch with optional transmitter output. The pressure switch is equipped with a LED display and is fully rotatable in the ideal position. The display and electrical connection can be rotated separately. In addition to the standard models the BPS300 can also be equipped out with other process connections, analog output or EPDM gaskets.

The Barksdale 450 series is a compact and intelligent pressure transmitter with Hart communication. The compact shape makes the pressure sensor easy to build into a machine without taking up too much space. The 450 series is suitable for various applications including; hydraulics (power packs), water treatment and various other industrial processes. The 450 series pressure transmitter communicate…

The BoT series digital pressure transducers are designed to monitor and control pressure in gas installations, mobile hydraulic equipment and vehicles, among others, exactly when you need it. Barksdale's BoT series pressure transmitters are configurable from 55 available standard options, but can also be completely customised.

Our manufacturer, Barksdale, has developed innovative solutions for pressure sensors used in hydrogen applications, including the hydrogen pressure transducer BHyT-BoT series.

The Barksdale BHyT Refuel pressure transducer meets industry demands for precision and safety in hydrogen compression and refueling applications. Its design prevents hydrogen permeation, embrittlement, and leakage, ensuring long-term stability even under high pressure. The BHyT is ideal for refueling stations, delivering reliable performance. This pressure transducer ensures stability across t…

The 425X series from Barksdale is a compact explosion-proof pressure transmitter. The compact size makes the 425X suitable as an OEM transmitter for machines and hydraulic powerpacks that are used in an ATEX zone. There are a large number of measuring ranges up to 689 bar relative pressure and optionally also absolute pressure.